I never thought I’d be the guy mixing hot pink into resin—but here we are. What started as a client request turned into one of the most talked-about pieces I’ve ever made. And yeah, it almost went off the rails more than once. Here's what happened.
It Started With a Color I Wasn’t Sure I Could Pull Off
Pink wasn’t my go-to — until I saw it in resin
I’d worked with deep blues, smoky blacks, even neon greens—but pink epoxy resin table? I figured it would look kitschy fast. But once I did a test pour with a soft rose pigment, I realized this could actually work.
Figuring out the balance between bold and beautiful
The trick was not going full bubblegum. I wanted richness and depth—not something that looked like a toy aisle exploded. Think rose gold epoxy table, but moodier.
The Build I Didn’t Know I Needed
Choosing the slab that could handle the pink
I used a piece of live edge maple—pale, clean, and soft enough in tone that the pink didn’t clash. Walnut would’ve been too heavy. Ash? Too yellow.
Getting the tone right (not bubblegum, not Pepto)
I mixed a few different mica powders—rose gold, blush pearl, and just a whisper of white tint. Layered it into a river-style pour so it had movement, not just flat color.
When the Pour Got Interesting
Mixing pigments and pouring with serious hesitation
I'll be honest—this one made me nervous. Every time I stirred, I second-guessed the tone. Too pink? Too shiny? But I poured it anyway.
Why pink resin behaves differently (or maybe it just felt that way)
The reflectivity threw me off. It was hard to tell how it would cure. Every bubble looked amplified. Every swirl felt more dramatic. I had to trust the process.
Everything That Tried to Ruin It
Edge leaks, air bubbles, and a random hair (of course)
No matter how clean your workspace is, a rogue hair will always show up for your most delicate build. I pulled it mid-pour with a toothpick and held my breath.
What worked to save the surface — and what didn’t
Seal coat saved the day. I poured a thin layer first to trap any microbubbles, then the main layer 24 hours later. A flood coat at the end gave me the clarity I needed. This process reminded me of what I shared in my polishing guide.
Seeing It Cured Changed Everything
The light hit it just right — and I kind of loved it
There was this soft, pearlescent glow I hadn’t expected. It looked bold without being loud. Feminine, sure—but also elevated.
How it ended up being the most complimented table I’ve made
Clients, visitors, even delivery guys asked about it. Nobody expected a pink resin table to steal the show—and yet, it did.
What I’d Do Differently If I Ever Try Pink Again
Why I’d prep the mold differently next time
I’d use a white mold base instead of black. It changes how the pigment reflects during the pour and makes color correction easier.
What I’d tweak in the pigment mix (subtle makes a statement)
Next time I’d dial back the shimmer slightly—lean more into milky tones with just a hit of metallic.
Where this color works best (and where it doesn’t)
Pink epoxy tables shine in soft, minimal interiors. Think neutral palettes, light woods, modern spaces. Rustic cabin? Not so much. If you're experimenting with resin and color combos, check out some of my more unexpected builds like the orange epoxy table.
FAQ: Things I Was Asking Before I Poured Pink
Will pink epoxy yellow faster?
If you’re using cheap resin—yes. Always go UV-stable, especially with lighter colors. I learned that the hard way. I go into more detail in this blog on yellowing resin.
How do you keep it from looking “cheap”?
Depth, layering, and the right wood pairing. Avoid neon tones unless you’re going for a full pop-art look.
Does wood tone matter with bold resin colors?
Absolutely. Light or neutral woods let bold resin colors breathe. Dark woods can make pink look muddy or overpowered. If you're curious, here’s what woods I’ve tried.
Final Thoughts
Making a pink epoxy table felt like jumping off the deep end—and it paid off. It challenged my design instincts, pushed my skills, and gave me one of my favorite tables to date. If you’ve been on the fence about bold resin colors, this is your sign: try it. Just do it your way.
If you want a custom piece or hit a wall building your own, feel free to drop a comment or reach out—happy to help. Have a blessed day!
Share: