M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn

Vendor:Fast Turn Fittings

Fast Turn Fittings

$5.65

The M6 x 1.00 x 40mm Titanium Button Head Bolt from Fast Turn Fittings is a durable, corrosion-resistant fastener crafted from Grade 5 titanium. Its button head design with an 11mm diameter and 4mm height is available in six finish colors to suit mechanical and vehicle projects needing lightweight, strong hardware. The bolt fits standard M6 threaded holes with a 1.00mm pitch and a 40mm thread length.

  • Grade 5 (Ti-6Al-4V) titanium construction
  • Fits standard M6 threaded holes with 1.00mm pitch and 40mm thread length
  • Button head diameter 11mm, height 4mm
  • Available finishes: polished, black, blue, gold, purple, and cosmic burn
  • Lightweight at approximately 0.14 oz
  • Suitable for replacing worn or generic OEM bolts in vehicles or mechanical assemblies
Color
Color: Polished

Customizable Titanium Bolt

Choose Your Finish and Upgrade Your Hardware

Specifications

Exact Details of the M6 x 1.00 x 40mm Titanium Button Head Bolt

Brand or supplier
Fast Turn Fittings
Product type
Individual Hardware
Material
Grade 5 (Ti-6Al-4V) titanium.
Thread size
M6 x 1.00mm pitch
Thread length
40mm
Button head diameter
11mm
Button head height
4mm
Weight
approx. 0.14 oz
Available finishes
polished, black, blue, gold, purple, cosmic burn

What arrives

One Fast Turn Fittings M6 x 1.00 x 40mm Titanium Button Head Bolt in the selected finish. Props and styling accessories shown in photos are not included.

Fit Information

Thread and Size Compatibility

Use to replace or upgrade bolts in vehicles or mechanical projects requiring M6 x 1.00 x 40mm fasteners.

Standard M6 Threaded Holes

Best with the surfaces, materials, tool systems, or workflows listed on this page. Do not assume compatibility with every resin, wood, machine, or finish.

Always follow the manufacturer's care, use, and safety guidance.

Order and Delivery

Shipping and Returns

Shipping

Shipping rates and estimated delivery times are shown at checkout.

Returns

Return requests accepted within 30 days of delivery. Contact Resin Society first for issues and coordination with Fast Turn Fittings.
M6 x 1.00 x 40mm Titanium Button Head Bolt in various finishes including polished, black, blue, gold, purple, and cosmic burn

Small piece, strong intent

A clean button head and a quiet sheen—hardware that disappears until it’s exactly what you notice.

Made to be seen up close

Fast Turn Fittings: M6 Button Head, Grade 5

Color where the details live

Loose, tired hardware breaks the line of a build and invites rust to linger. The Fast Turn Fittings M6 x 1.00 x 40mm Titanium Button Head Bolt brings Grade 5 strength in a slim 11mm dome that sits finished, not fussy. At roughly 0.14 oz, it lightens the small places that add up across a vehicle or assembly.

Quiet confidence in a single turn

Details set the tone when the hood’s up or the panels come off. Corrosion resistance keeps the look steady through miles and weather, while polished, black, blue, gold, purple, and cosmic burn finishes let the hardware echo the palette of the build. Reliability and appearance, in the same breath.

For the hands that fine-tune

Enthusiasts and builders replacing OEM M6 hardware with a lighter, corrosion-resistant bolt that carries a deliberate finish.

Where it works

Swap into visible M6 mount points on vehicles or mechanical assemblies to refresh hardware and match surrounding components by finish.
  • Woodworking
  • Resin prep
  • Finishing
  • Shop setup
  • Maker projects
Fast Turn Fittings brand cover

About the Maker

Fast Turn Fittings

Fast Turn Fittings grew from enthusiasts who wanted better, right-fit hardware for their builds. The brand specializes in vehicle-specific titanium kits for 500+ applications and individual fasteners in sizes M4 through M12. Each fastener is made from aerospace-grade titanium or zinc-coated stainless steel, and every kit is hand-verified against its spec sheet before shipping. Fast Turn pairs that materials and fitment focus with fulfillment and warranty practices meant to match the product quality. For makers and builders, these small-format, precision fasteners are the finishing detail that keeps a project looking and performing like the work it was meant to be.
Explore Fast Turn Fittings
93trees planted to date

Your order gives back

When you buy from Resin Society, you help plant trees through our reforestation partnership. It is a small way your order supports the materials, homes, and landscapes makers care about.

Questions and Answers

Fast Turn Fittings FAQs

What size and thread is this bolt?
It’s M6 with a 1.00mm pitch and a 40mm thread length; overall length is 44mm.
What tool fits the head?
It has a hex socket button head; use the appropriate metric hex key for an M6 button head.
How large is the button head?
The head is 11mm in diameter and 4mm in height.
What is it made from?
Grade 5 (Ti‑6Al‑4V) titanium, chosen for strength and corrosion resistance.
Which finishes can I choose?
Polished, black, blue, gold, purple, and cosmic burn finishes are available.